Speedometer - Yamaha Grizzly YFM35FGIX Owner's Manual

Table of Contents

Advertisement

If the warning light stays on, allow the engine to
cool. If the warning light stays on when the engine
is cool, have a Yamaha dealer check the electrical
circuit.
ECB00010
CAUTION:
G
The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to spec-
4
ification.
G
Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.
EBU17952
On-Command four-wheel-drive indicator light
"
"
This indicator light comes on when the On-Com-
mand four-wheel-drive switch is set to the "4WD"
position.
NOTE:
Due to the synchronizing mechanism in the differ-
ential gear case, the light may not come on until
the ATV starts moving.
EBU28341
On-Command differential gear lock indicator
light "
"
This indicator light and the On-Command four-
wheel-drive indicator light "
On-Command differential gear lock switch is set to
the "LOCK" position.
EBU18020

Speedometer

The speedometer shows the riding speed. This
speedometer is equipped with an odometer and a
tripmeter. The tripmeter can be reset to "0" with the
reset knob. Use the tripmeter to estimate how far
you can ride on a tank of fuel before going to re-
serve. This information will enable you to plan fuel
stops in the future.
4-3
" come on when the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm35fgiwGrizzly 350

Table of Contents