Adjusting The Drive Select Lever Safety System Cable; Checking The Front Brake Pads And Rear Brake Friction Plates - Yamaha Grizzly YFM35FGIX Owner's Manual

EBU24070
Adjusting the drive select lever safety
system cable
The drive select lever safety system cable stretch-
es with use, which can result in improper function.
Therefore, the safety system cable should be
checked and adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
EBU28413
Checking the front brake pads and rear
brake friction plates
The front brake pads and the rear brake friction
plates must be checked for wear at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
NOTE:
This ATV is equipped with a wet, multiple-disc type
rear brake, which is located inside of the final gear
case.
EBU24171
Front brake pads
Check each front brake pad for damage and mea-
sure the lining thickness. If a brake pad is dam-
aged or if the lining thickness is less than 1.0 mm
(0.04 in), have a Yamaha dealer replace the brake
pads as a set.
1. Brake pad
2. Lining thickness
NOTE:
The wheels need to be removed to check the
brake pads. (See page 8-48.)
8-29
8