Cable Connection - Yamaha CDR400tx User Manual

Chapter 3 - Installing the Yamaha CDR400tx Drive

Cable Connection

Power cable
Insert the power cable securely to the "AC IN" connector on the rear
panel.
SCSI cable
Connect the SCSI cable to either of the CDR400tx rear panel SCSI
connectors (1) or (2), and connect the other end of the SCSI cable to
the host computer.
The CDR400tx is not supplied with a SCSI cable. You will need to
obtain one that will fit the drive and the host computer connectors.
CDR ID
TERMINATOR
1
OFF
SCSI-1
SCSI-2
LINE OUT
CDR ID
R L
TERMINATOR
1
OFF ON
SCSI-1
SCSI-2
LINE OUT
R L
ON
9