Yamaha C40A Owner's Manual page 60

Hide thumbs Also See for C40A:
Table of Contents

Advertisement

w
8 Do not touch or remove electrical parts
when starting or during operation.
8 Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
EMU00339
8 Flushing in a Water Tank
cC
If the fresh water level is below the level
of the anti-cavitation plate, or if the water
supply is insufficient, engine seizure may
occur.
1) Remove the engine top cowling and
silencer cover.
2) Install the outboard motor on the
water tank.
3) Fill the tank with fresh water to above
the level of the anti-cavitation plate.
4) Run the engine at a fast idle for 10~15
minutes.
5) Just prior to turning off the engine,
quickly
Engine Fogging Oil" (Part No. LUB-
STRRT-12-00) alternately into each
carburetor. When properly done, the
engine will smoke excessively and
almost stall.
6) Remove the motor from the water
tank.
7) Install the silencer cover and top
q
cowling.
1 Water surface
2 Lowest water level
w
605024
4-5
spray
"Yamaha
E
Stor-Rite

Advertisement

Table of Contents
loading

This manual is also suitable for:

C50a

Table of Contents