Related Manuals for ZANKER CL231
Summary of Contents for ZANKER CL231
- Page 1 ZANKER CL 231 KŸhlschrank RŽfrigŽrateur Koelkast Refrigerator Gebrauchsanweisung Mode dÕemploi Gebruiksaanwijzing Instruction booklet 2222 063-83...
-
Page 2: General Safety
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. -
Page 3: Environment Protection
is advisable to wait at least two hours before damage to the appliance. Do not use a connecting the appliance to allow the oil to flow mechanical device or any artificial means to back in the compressor. speed up the thawing process other than those recommended by the manufacturer. -
Page 4: Operation
Cleaning the interior refrigerator depends on: ¥ room temperature; Before using the appliance for the first time, wash the interior and all internal accessories with luke- ¥ how often the door is opened; warm water and some neutral soap so as to remove ¥... -
Page 5: Maintenance
HINTS Hints for refrigeration cleaned and placed in the special drawer(s) provided. Useful hints: Butter and cheese: these should be placed in Meat (all types): wrap in polythene bags and place special airtight containers or wrapped in aluminium on the glass shelf above the vegetable drawer. foil or polythene bags to exclude as much air as possible. -
Page 6: Customer Service And Spare Parts
Defrosting Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates. -
Page 7: Rear Spacers
Rear spacers In the bag with the documentation, there are two spacers which must be fitted in the two top corners. Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in figure. Then turn them through 45¡... -
Page 8: Door Reversibility
Door reversibility 1. Unplug the appliance from the power supply before carrying out the below-mentioned operations. 2. Remove the bottom hinge (3).with pin (1) and feets (2) 3. Remove the door by releasing it from the top hinge pin (D). 4.