Related Manuals for ZANKER CL232
Summary of Contents for ZANKER CL232
- Page 1 ZANKER CL 232 Koelkast Refrigerator Gebruiksaanwijzing Instruction booklet 2222 063-84...
-
Page 2: General Safety
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. -
Page 3: Environment Protection
is advisable to wait at least two hours before damage to the appliance. Do not use a connecting the appliance to allow the oil to flow mechanical device or any artificial means to back in the compressor. speed up the thawing process other than those recommended by the manufacturer. -
Page 4: Operation
Cleaning the interior refrigerator depends on: • room temperature; Before using the appliance for the first time, wash the interior and all internal accessories with luke- • how often the door is opened; warm water and some neutral soap so as to remove •... -
Page 5: Maintenance
HINTS Hints for refrigeration cleaned and placed in the special drawer(s) provided. Useful hints: Butter and cheese: these should be placed in Meat (all types): wrap in polythene bags and place special airtight containers or wrapped in aluminium on the glass shelf above the vegetable drawer. foil or polythene bags to exclude as much air as possible. -
Page 6: Customer Service And Spare Parts
It is important to periodically clean the defrost water drain hole in the middle of the refrigerator Important: compartment channel to prevent the water overflowing and dripping onto the food inside. Never use sharp metal tools to scrape off frost Use the special cleaner provided, which you will from the evaporator as you could damage it. -
Page 7: Electrical Connection
This appliance complies with the following Electrical connection E.E.C. Directives: Before plugging in, ensure that the voltage and - 87/308 EEC of 2/6/87 relative to radio interference frequency shown on the serial number plate suppression. correspond to your domestic power supply. Voltage - 73/23 EEC of 19.2.73 (Low Voltage Directive) and can vary by ±6% of the rated voltage.