Yamaha BIG BEAR 4X4 Owner's Manual page 147

1. Bulb holder cover
WARNING
POTENTIAL HAZARD
The headlight bulb is hot when it is on
and immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
6. Put a new headlight bulb into position,
and then secure it in place with the bulb
holder.
7. Install the headlight bulb holder cover.
CAUTION:
_
Make sure the headlight bulb holder cover
is securely fitted over the bulb holder and
seated against the reflector.
_
8. Install the headlight assembly, and then
connect the coupler.
9. Adjust the headlight beam if necessary.
(See page 8-37.)
8-36