Engine Oil - Yamaha BIGBEAR YFM400NM Owner's Manual

EBU00268

Engine oil

1. Engine oil level measurement
a. Place the machine on a level place.
b. Warm up the engine for several min-
utes and stop it.
c. Remove the dipstick and wipe it off
with a clean rag. Insert the dipstick in
the filler hole without screwing it in.
1. Dipstick
NOTE:
Wait a few minutes until the oil level set-
tles before checking.
d. Remove the dipstick and inspect the
oil level.
e. The oil level should be between the
maximum and minimum marks. If the
level is low, add oil to raise it to the
proper level.
CAUTION:
Be sure no foreign material enters the
crankcase.
1. Maximum level mark
8-5
2. Minimum level mark