Setting The Time; Setting The Date - E-Bench KH 2289 Operating Instructions Manual

Setting the time

If a subsequent button is not pressed within ten se-
conds, the kitchen radio defaults back into automa-
tic mode (the currently set time is displayed).
The radio must be off to set the time.
1. In automatic mode press the button
SETTING
once. The time blinks.
i
UP/DOWN
2. Press the buttons
minute intervals. Pressing and holding the but-
tons changes the time at ten-minute intervals

Setting the date

1. In automatic mode press the button
SETTING
i twice. The display shows
"01 01 2007 ", the date display blinks.
D M Y
UP/DOWN
2. Press the buttons
day intervals. Pressing and holding the buttons
changes the date at intervals of 10 days.
If a button is not pressed within 10 seconds, the
kitchen radio defaults back to automatic mode.
Setting the SDA
By means of the SDA (Special Day Alert) mode it is
possible to store certain days. You can activate up
to 6 dates. The kitchen radio then reminds you at 8
a.m.of the set day.
1. In automatic mode press the button
TING
i three times. Alternatively blinking in the
display are "SDA 1" and the current set date.
UP/DOWN
2. Press the buttons
day intervals. Pressing and holding the buttons
changes the date at intervals of 10 days.
TIMER
3. Press the button
When you deactivate the year, the SDA alarm
will respond on the set date every year.
1-6
4. Press the button
SDA alarms.
MODE
s to set the time at
MODE
to set the date in
s
MODE SET-
to set the date in
s
o to deactivate the year.
r to programme in further
If a button is not pressed within 10 seconds, the
kitchen radio defaults back to automatic mode.
When the set date corresponds with the SDA
alarm...
• an acoustic signal is sounded at 8 a.m. for ten
minutes,
• "SDA" blinks on the display,
• the acoustic signal is repeated on the hour
every hour until 11 p.m.
If you wish to stop the SDA alarm, press any button.
Automatic Update (RDS)
The RDS signal transfers additional information such
as name of the station, time or song title to the radio.
With the assistance of the automatic update function,
the time display of your kitchen radio is automatically
updated upon reception of the RDS signal.
1. In automatic mode press the button
SETTING
i four times.
On the display appears "UPDATE".
2. Press the button
update function.
A clock symbol flashes in the upper left of the
display. The time is automatically updated
when the appliance is switched on and recep-
tion is made from a station transmitting an RDS-
Signal. The update is complete when the clock
symbol stops blinking and is displayed conti-
nuously.
3. Press the button
automatic update function.
The clock symbol no longer appears.
Switching the dimmer on and off
The dimmer functions darkens the display, when no
actions are being taken.
1. In automatic mode press the button
TING
i five times. On the display appears
"DIM OFF".
2.
Press the button
function. On the display appears "DIM ON".
- 6 -
MODE
UP
to activate the automatic
s
DOWN
to deactivate the
s
MODE SET-
UP
s to activate the dimmer