WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
off frost or ice. Frost may be removed by using installation instructions. the scraper provided. Under no circumstances • Parts which heat up should not be exposed. should solid ice be forced off the liner. Solid ice Wherever possible the back of the product should be allowed to thaw when defrosting the should be against a wall.
Control panel A. Thermostat light B. Fast freezing light C. Warning light Fast freezing D Fast freezing knob to start fast- freezing, turn the knob (D) towards “S”. E. Thermostat knob Pilot light (B) will come on. Cleaning the interior Warning light Before using the appliance for the first time, wash Warning light (C) lights up when the temperature...
Freezing fresh food Storage of frozen food The 4-star compartment is suitable for When first starting-up or after a period out of use, long term storage of commercially frozen food, and before putting the products in the compartment turn for freezing fresh food. the fast-freezing knob to the “S”...
HINTS • it is advisable to show the freezing-in date on Hints for freezing each individual pack to enable you to keep tab of To help you make the most of the freezing process, the storage time; here are some important hints: •...
Defrosting The freezer compartment, however, will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 4 mm. During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
INSTALLATION Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. For safety reasons, minimum ventilation must be as shown in Fig. Appliance positioned under overhanging kitchen wall units (see Fig. A). Appliance positioned without overhanging kitchen wall units (see Fig.
Door reversibility 1. Unplug the appliance from the power supply before carrying out the below-mentioned operations. 2. Remove the ventilation grill (D). 3. Remove the bottom hinge (E). 4. Remove the door by releasing it from the top hinge pin (D). PR19 5.