Headlight Beam Adjustment - Yamaha WOLVERINE YFM350FXT Owner's Manual

WARNING
POTENTIAL HAZARD
The headlight bulb is hot when it is on
and immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
4. Put a new bulb into position and secure it
in place with the bulb holder.
5. Install the bulb holder cover.
CAUTION:
Make sure the bulb holder cover is secure-
ly fitted over the bulb holder and seated
against the reflector.
6. Install the headlight unit assembly.
7. Adjust the headlight beam if necessary.
EBU01089

Headlight beam adjustment

CAUTION:
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the adjusting screw in
direction a.
To lower the beam, turn the adjusting screw in
direction b.
1. Adjusting screw
8-41