Yamaha WOLVERINE YFM350FXT Owner's Manual page 113

9. Install the oil filter cover by installing the
bolts, and then tighten them to the speci-
fied torque.
Tightening torque:
Oil filter cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
10. Install the oil strainer, compression
spring, O-ring and engine oil drain bolt.
Tighten the engine oil drain bolt to the
specified torque.
CAUTION:
_
Before installing the engine oil drain bolt,
be sure to install the O-ring, compression
spring and oil strainer.
_
Tightening torque:
Engine oil drain bolt:
32 Nm (3.2 m·kgf, 23 ft·lbf)
11. Add the specified amount of the recom-
mended engine oil, and then install and
tighten the engine oil filler cap.
Recommended oil:
See page 10-2.
Oil quantity:
Without oil filter element replacement:
2.9 L (2.6 Imp qt, 3.1 US qt)
With oil filter element replacement:
3.0 L (2.6 Imp qt, 3.2 US qt)
8-9