When installing a spark plug, always clean the
gasket surface and use a new gasket. Wipe
off any grime from the threads and tighten to
the specified torque.
Tightening torque:
Spark plug:
20 Nm (2.0 m0kgf, 14 ft0lbf)
EBU00288
Air filter cleaning
NOTE:
There is a check hose at the bottom of the air
filter case. If dust or water collects in this
hose, empty the hose and clean the air filter
element and air filter case.
1. Remove the seat.
2. Remove the air filter case cover.
1. Check hose
1. Air filter case cover
3. Remove the air filter element, and sepa-
rate it from the guide.
8-14
q
1