EBU00932
Parking brake adjustment
Parking brake adjustment may be required if
the parking brake does not hold properly.
1. Fully loosen the parking brake cable ad-
justing bolt locknut and the adjusting bolt
on the clutch lever.
1. Locknut
2. Loosen the adjusting bolt locknut and the
adjusting bolt on the rear brake caliper.
2. Adjusting bolt
1. Locknut
a. Cable length
3. Turn the adjusting bolt on the clutch lever
so that cable length a is 64 ~ 68 mm
(2.52 ~ 2.68 in).
NOTE:
_
If the cable cannot be adjusted to specifica-
tion, consult a Yamaha dealer.
_
4. Tighten the adjusting bolt locknut on the
clutch lever.
8-29
2. Adjusting bolt