Transmission Oil - Yamaha BANSHEE YFZ350P Owner's Manual

EBU00768

Transmission oil

Transmission oil measurement
1. Place the machine on a level place.
2. Warm up the engine for several minutes
and then stop it.
3. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
q
1. Dipstick 2. Maximum level mark
w
e
3. Minimum level mark
8-6
NOTE:
Wait a few minutes until the oil level settles
before checking.
4. Remove the dipstick and inspect the oil
level.
5. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, add oil to raise it to the proper level.
6. Install the dipstick.
Transmission oil replacement
1. Place the machine on a level place.
2. Warm up the engine for several minutes
and then stop it.
3. Place a container under the engine.
4. Remove the dipstick and drain bolt to
drain the oil.