When installing the spark plug, always clean the
gasket surface and use a new gasket. Wipe off
any grime from the threads and tighten to the
specified torque.
Tightening torque:
Spark plug:
12.5 Nm (1.25 m0kgf, 9.1 ft0lb)
EBU01034
Air filter cleaning
NOTE:
There is a check hose at the bottom of the air fil-
ter case. If dust or water collects in this hose,
empty the hose and clean the air filter element
and air filter case.
1. Check hose
1. Remove the front cover by removing the
screws.
1. Front cover
8-10
q
w
w
q
×
2. Screw (
2)