Final Gear Oil - Yamaha RAPTOR YFM80WP Owner's Manual

EBU00869

Final gear oil

Final gear oil measurement
1. Place the ATV on a level surface.
2. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
3. Remove the dipstick and inspect the oil
level.
4. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, add oil to raise it to the proper level.
cC
Be sure no foreign material enters the final
gear case.
5. Install the dipstick.
w
e
1. Dipstick
3. Minimum level mark
Final gear oil replacement
1. Place the ATV on a level place.
2. Place a container under the final gear
case.
3. Remove the dipstick and drain bolt to drain
the oil.
8-7
q
2. Maximum level mark