Replacing The Tail/Brake Light Bulb - MBK FlameX NXC125 Owner's Manual

the bulb life will be adversely affected.
Thoroughly clean off any dirt and fin-
gerprints on the headlight bulb us-
ing a cloth moistened with alcohol
or thinner.
6. Install the headlight bulb cover, and
then connect the coupler.
7. Install the panel.
8. Have an MBK dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2. Remove the defective bulb by push-
ing it in and turning it counterclock-
wise.
1
ZAUM00**
1. Bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
6-27
EAU24131
cC
Do not overtighten the screws, other-
wise the lens may break.
ECA10680
1
2
3
4
5
6
7
8
9