Sidestand; Sidestand Switch Operation Check - MBK FlameX NXC125 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Sidestand

The sidestand is located on the left side
of the frame. Raise the sidestand or lower
1
it with your foot while holding the motor-
cycle upright.
2
NOTE:
The built-in sidestand switch is part of
3
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
4
(See further down for an explanation of
the ignition circuit cut-off system.)
5
w
6
The vehicle must not be ridden with
the sidestand down, or if the
7
sidestand cannot be properly moved
up (or does not stay up), otherwise
8
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
9
MBK's ignition circuit cut-off system
has been designed to assist the op-
erator in fulfilling the responsibility
of raising the sidestand before start-
ing off. Therefore, check this system
regularly as described below and
EAU15300
have an MBK dealer repair it if it does
not function properly.
EWA10240
Sidestand switch operation
check
Check the operation of the sidestand
switch against the information below.
w
8 8 8 8 8 The vehicle must be placed on
8 8 8 8 8 If a malfunction is noted, have an
3-10
the centerstand during this in-
spection.
MBK dealer check the system be-
fore riding.
EAUT1091
EWA10260