Yamaha SX225A Owner's Manual page 25

ON
OFF START OFF
UP
UP
DN
DN
DOWN
UP
EMC48110
Main switch
The main switch controls the ignition sys-
tem; its operation is described below.
8 OFF
Electrical circuits switched off.
(The key can be removed.)
8 ON
Electrical circuits switched on.
(The key cannot be removed.)
8 START
Starter-motor will turn and start engine.
ON
START
(When the key is released, it returns auto-
matically to "ON".)
EMU01112
Power Trim/Tilt Switches
The power trim/tilt adjusts the motor
angle in relation to the transom. The
power trim/tilt switch is located on the
remote control lever grip. Individual-
engine switches are also on the control
cover. Pushing the switch "UP" trims the
motor up, then tilts the motor up.
701034
Pressing the switch "DN" tilts the motor
down and trims the motor down. When
the switch button is released, the motor
will stop in its current position.
NOTE:
8 On the dual engine control, the switch
8 Refer to the sections "Adjusting Trim
702042
2-4
on the remote control grip controls both
engines at the same time.
Angle" and "Tilting Up/Down" in
Chapter 3 for instructions on usage.
E