Playing Back Songs In The Usb Memory - Yamaha SILENT PIANO SG2 Owner's Manual

Playing Back Songs in the USB Memory

Carrying out playback operations (see page 14) when the USB memory is inserted into this unit plays back the last
saved song in the USB memory. You can also play back all songs in the USB memory from the start, or select the
song for playback.
■ To play back the last saved song in the USB memory
With the USB memory inserted into this unit,
press the PLAY/STOP button.
If no saved file is found in the USB memory, and another playable file
(Standard MIDI File) exists, the unit begins playback of that file. If no
such file exists, the unit returns to its normal state.
■ To play back all songs in the USB memory
1
With the USB memory inserted into this unit, hold down B6 and C7 (the two
white keys at far right of the piano keyboard) while turning the unit on.
2
Release the keys 1 to 2 seconds after turning the unit on.
Playback automatically begins at the song first saved to the USB memory.
To quit the song playback
Switch the unit off and then on again.
To select the song for playback (direct song selection)
Hold down the A-1 key, and press any of the keys from C0 through to C#4 corresponding to the number of a
song.
• "USERSONG**.MIDI" files in the "USER FILES" folder in the USB memory are assigned to the keys from C0
through to C#4, starting from the left.
• Pressing any key other than those listed above does not select a song for playback.
• If you select a song when playback is stopped, it will be selected the next time you start playback.
B6 C7
17