Engine stop switch lanyard (Cable)
By connecting to the stop switch and opera-
tor will stop the engine If the operator falls
off the vehicle.
Engine stop switch
Depress to stop the engine.
Lock plate
Insert the lock plate in the engine stop lan-
yard switch to allow the engine to be start-
ed.
Remove the plate to stop the engine or pre-
vent it from starting.
Engine stop lanyard switch
Removing the lock plate makes to stop the
engine and disable to start the engine.
Starter switch
Depress to start the engine.
Oil level warning lamp
TK0125
Throttle lever
Controls the engine speed when accelerat-
ing and decelerate.
Drain plugs
Open to drain water in the bilge when the
vehicle is on dry land. Tighten securely
before launching craft.
Jet nozzle
Changes the direction of jet thrust according
to handlebar position to steer the vehicle.
2-2
E
TK0135