Transmit Frequency - Whites XLT Manual

Chapter 5 XLT ®
48
Pro Options

TRANSMIT FREQUENCY

4
MIN MAX
Tips - Use level number
"4" (6592.5 Hz) unless
interference results from
other detectors. Move
away from level "4" only
far enough to prevent
such interference.
(Signal, Transmit, Receive))
28. Transmit Frequency
Alters the normal operating frequency (6592.5 Hz)
to avoid interference from other metal detectors
operating close by. Operating frequency is the
frequency the detector transmits and receives its
signal.
Lower numbers equal
lower frequencies,
Higher numbers equal
higher operating
frequencies,
Other metal detectors operating at the same fre-
quency will cause interference. By shifting to a
different frequency such interference can be
avoided from detectors operating nearby.
The best performance will be achieved at the
standard number "4" setting. If however, you
cannot search due to interference from other detec-
tors, use an alternate frequency.
Remember that once the trigger is squeezed and
released to return to a search mode, the last option
used can be accessed by pressing either of the arrow
controls. This ARROW RETURN feature can be
used to handily change TRANSMIT FREQUEN-
CIES during a competition hunt.
1 = 6027.5 Hz
2 = 6204.7 Hz
3 = 6392.7 Hz
4 = 6592.5 Hz
5 = 6805.2 Hz
6 = 7032.0 Hz
7 = 7274.5 Hz