Checking Power Failure, Failure Due To Condensation And Usage Duration - Sanyo TLS-9024P Instruction Manual

SETTING THE RS-232C OR RS-485 DATA TRANSFER SPEED
RS485 RJ-11 connector layout
NOTE:
Do not connect to phone line.
Connector A
Pin number
signal
1 Not used
2 Not used
3
4
5 Not used
6 Not used
A: Non-inverting driver output/receiver input
B: Inverting driver output/receiver input
CHECKING POWER FAILURE, FAILURE DUE TO
CONDENSATION AND USAGE DURATION
1
Press the MENU button until the (POWER
FAILURE), (DEW) and (USED TIME) menu is
displayed.
(POWER FAILURE) . . The number of power
(DEW) . . . . . . . . . . . . . The number of failures
(USED TIME) . . . . . . . The video heads usage
English
1 6
Connector B
signal
Not used
Not used
A B
B A
Not used
Not used
failures, and the date
and time of the most
recent power failure and
recovery are displayed.
due to condensation, and
the date and time of the
most recent failure and
recovery are displayed.
duration and the power on
duration are displayed.
RS-485 Connection
This VCR can use the straight type or crossed type
connecting cables.
If using a straight type cable, connect it from the "A" to
the "A" or from the "B" to the "B" RS-485 connector.
If using a crossed type cable, connect it from the "A" to
the "B" or from the "B" to the "A" RS-485 connector.
Types of cables
Straight type: A cable with pin connection number
correspondence (i.e. pin 1 to pin 1, pin
2 to pin 2, etc.).
Crossed type: A cable without pin connection number
correspondence.
@@@@<POWER@FAILURE>
002@FAILURE@@25-12@07:15
@@@@RECOVERY@25-12@07:30
@@@@@@@@@<DEW>
001@FAILURE@@25-12@11:00
@@@@RECOVERY@25-12@12:00
@@@@@@<USED@TIME>
@@@@VIDEO@@@@@@@@@@00003H
@@@@POWER@@@@@@@@@@00007H
2
Press the SEARCH/AUDIO ON button, the normal
screen is displayed.
NOTE:
œ If the MENU RESET button is pressed while the
(POWER FAILURE) and (DEW) menu is displayed, the
data is erased. The (USED TIME) data cannot be reset.
"@" will be erased from the digital display.
31
Example