Sanyo TLS-9024P Instruction Manual page 28

Time lapse video cassette recorder
Table of Contents

Advertisement

SPECIAL PLAYBACK
Day/Time Search
1
Press the SEARCH/AUDIO ON button three times
during stop mode.
ø "T/D SEARCH 01 00:00" will be displayed on
screen.
1H22M33S
T/D@SEARCH
01@@00:00
DAY@TIME
2
Press the REC/PLAY SPEED l (or j) button to set
the desired day, then turn the JOG dial clockwise.
3
Press the REC/PLAY SPEED l (or j) button to set
the desired hour, then turn the JOG dial clockwise.
4
Press the REC/PLAY SPEED l (or j) button to set
the desired minutes.
NOTES:
œ The setting can be made in 10 minutes
increments only.
œ For recordings made on other VCRs, the exact
time may not be found even if the minutes are
entered. For tapes recorded on older models of
VCRs produced by this company (the ones
without a minutes setting for the day/time search
function), make sure to set the minutes to "00".
5
Turn the SHUTTLE ring clockwise (or
counterclockwise).
ø The desired day/time is searched and a still
image of the recording will appear on-screen.
6
Press the PLAY button.
ø Playback will start.
NOTES:
œ If during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œ The alarm and day/time data are recorded on the
tape in a similar format. If they overlap, the alarm
data will have the priority. Therefore, when searching
for a day/time when an alarm recording was done,
the day/time search will not stop at the desired
location. In such a case, use alarm scan to find the
desired recording location.
œ The day/time search function may not operate
correctly if searching for a timer recording time or if
the clock on the recording VCR has been adjusted
using the CLOCK ADJUSTMENT function.
œ Depending on the recording conditions, the function
may not operate properly.
English
SHUTTLE Ring Operation
From normal playback, still image, stop mode, etc., turn
the clockwise or counterclockwise to select a mode as
indicated below.
1
Turn the SHUTTLE ring in either direction where
the desired mode is selected.
: Operation will not return to the original mode when
the SHUTTLE ring is released.
Reverse direction
Rewind
Reverse picture
search (Locked)
Reverse picture
Reverse playback
search
Reverse
Reverse picture
Reverse
Slow
search
playback
motion
*1: Stop mode, Forward picture search or Reverse picture
search.
*2: Fast forward or Rewind
NOTES:
œ If operated from still image mode and playback
mode, operation will return to the original mode when
the SHUTTLE ring is released.
œ If operated from normal playback mode, reverse
playback is only possible during 3-hour playback
speed mode.
œ The sound is muted.
27
Original
Forward direction
mode
*1
Fast forward
Forward picture
*2
search (Locked)
Normal
Forward picture
Normal playback
playback
search
Still
Slow
Normal
Forward picture
image
motion
playback
search

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tls-9168p

Table of Contents