Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yield Technology SG-VT02 QB
Summary of Contents for Yield Technology SG-VT02 QB
-
Page 2: Table Of Contents
Warranty Installation page 8 The Yield Technology Co., Ltd. (YTC) warrants to the purchaser that this product, under normal use and conditions, will be free from defects in materials and workmanship for a Vehicle Unit – LED Indicators page 16 period of 12 months from the date of original purchase. -
Page 3: Parts & Accessories
1. Parts & Accessories 1. SuperGuard GPS/GPRS Main Unit On receipt of your SuperGuard system, please check that all contents 2. GPS Aerial are complete and correct. 3. GSM Antenna 4. 10-PIN Wiring Harness (CON 1) 5. 14-PIN Wiring Harness (CON 2) 6. -
Page 4: Superguard Vehicle Unit - Features
2. SuperGuard Vehicle Unit – Features 3. Preparations The SuperGuard SG-VT02 is equipped with a variety of basic anti-theft or In order to install the SuperGuard Vehicle Unit properly, the car alarm features. following preparations should be carried out: Prepare one operational GSM SIM card. Make sure that the SIM card As an authorized Contact person you can use your GSM phone to •... -
Page 5: Installation
4. Installation Connecting The Vehicle Unit: NOTE: Finish all wiring and connections to the correct vehicle outputs and inputs before you apply NOTE: Please note that installation methods may the connectors to the Vehicle Unit !!! vary between vehicle models. For expert wiring and connecting please contact a professional car electronics workshop for installation support and To obtain maximum functionality of your Vehicle Unit you should... - Page 6 Installation of SOS Emergency Push Button CON 1: Cable Description and Colors SOS Push Button Cable Description Color Optional (free) Black/White Optional (free) Red/White Optional (free) CON 2/ PIN 3 12 V (free) Black (assigned) Microphone Input (HF+) Purple Connect to Alarm Siren (COMM) Blue/White Installation of Relay for Immobilizer function: Connect to Alarm Siren (NO)
- Page 7 CON 1 Wiring Diagram (CON 2 see opposite side) When laying the wiring loom • Try to ' bury' all wiring • Avoid abrasive corners and sharp edges • Avoid sharp folding and pinching the cables Make sure that the connections have been made correct before you connect the Main Connector to the Vehicle Unit.
- Page 8 Finish the Installation NOTE: Please note that adhesive sun absorber screens may consist of metal. This can distract or block the GPS signal. In that case the GPS aerial o To ensure that the Vehicle Unit should be mounted outside of the vehicle. is able to operate even without vehicle battery support, you will need to connect the supplied...
-
Page 9: Vehicle Unit - Led Indicators
5. Vehicle Unit – LED Indicators 6. Getting Started After plucking the Main Connector into the Vehicle Unit, the device will power up and automatically attempt to register to GSM network. Provided that your vehicle and the Vehicle Unit’s GPS antenna is positioned in an area with clear un-obstructed view of the sky, the device will then start scanning for GPS satellites to obtain its first GPS lock. -
Page 10: Activate/ Disable Vehicle Security
7. Activate/ Disable Vehicle Security Dial Call to Vehicle Unit 3 Rings… 4 Rings Hang Up In addition, you will receive an SMS short message from the device, confirming that your vehicle security is disarmed now As an authorized Contact person, you are able to activate and disable the vehicle To use SMS command to activate the vehicle security, type and security system either from your GSM cell... -
Page 11: Car Alarm/ Anti-Theft Features
Additional Control Commands 8. Car Alarm/ Anti-Theft Features Car Owners and Contact persons can use their authorized mobile phone numbers to control the central locking system and lock or unlock the vehicle doors through short message commands. To use SMS command to lock the vehicle doors, type and send this command to the Vehicle Unit: As soon as the Security of the SuperGuard Vehicle Unit has been activated, the following car... - Page 12 Vehicle is Moving Peter’s truck is in Gatwick Parkway., near intersection If the car has been moved in armed status (for example, in case of Madison; GPS Car Alarm: tow-away), the following car alarm features will come into effect: Main Power Cut The alarm siren will sound for 30 seconds.
-
Page 13: Emergency Alarms
9. Emergency Alarms Users in the car can hang up the automatic SOS phone call by pressing the SOS button again. After placing the SOS phone call, the vehicle unit will automatically start tracking and update GPS positions to the Control Base every 60 seconds over a period of 30 minutes. -
Page 14: Monitoring Activities
10. Monitoring Activities The Vehicle Unit will send an alarm message and GPS coordinates to the Control Base. The Control Base software will find the street name and closest intersection from a map server and send these details through SMS short messages to all Contact numbers, with the text: Users are able to setup and configure monitoring activities and alerts to the... -
Page 15: Locating And Tracking
11. Locating and Tracking 12. Phone Call Operation Apart from car security and vehicle tracking features, the SuperGuard Vehicle Unit is able to accept phone calls. Authorized users can interrogate the Vehicle Unit All incoming phone calls will be automatically accepted and to receive locations, street names and details. -
Page 16: Technical Specifications
14. Technical Specifications o Sensitivity: GSM-850: < -106 dBm E-GSM-900: < -106 dBm DCS-1800: < 104 dBm SIZE (L/W/H): 144.5 x 71 x 38 mm PCS-1900 : < 104 dBm POWER SUPPLY: DC 9V ~ DC 16V GSM Application Programming Interface AT Commands POWER CONSUMPTION (Spare Battery): UI APIs...
Need help?
Do you have a question about the SG-VT02 QB and is the answer not in the manual?
Questions and answers