Steambrush Function - Rowenta Steam 'n Press Instructions For Use Manual

STEAMBRUSH FUNCTION

Using for the first time
To avoid damage to clothes from dust or dirt that may collect in
the appliance, we recommend that before the first use or after the
appliance has been stored for some time you test the burst of steam
on an old cloth.
The combination of steam and the brush will gently remove the
wrinkles.
After treatment, let the article of clothing cool down on the hanger
before wearing.
Never steam clothes while they are being worn.
!
8
When the Steam 'n Press is plugged
!
in the soleplate heats. Do not touch
or remove the soleplate cover
without letting the appliance cool
down.
Make sure soleplate cover is securely
in place before using the steambrush
function. Please reference section in
instructions called "Attaching the
Soleplate Cover".
Plug in your Steam 'n Press and set the
thermostat to the
After approximately one minute it will
reach working temperature.
To begin steaming, press the burst of
steam button 4 to 5 times to prime the
unit.
NOTE: The Steam 'n Press can be used
on virtually all articles of clothing in the
home. Care should be taken when
steaming heat sensitive synthetic materi-
als such as nylon or rayon. We
recommend you test acrylic, nylon or
other synthetic fabrics on an unobtrusive
area to ensure these fabrics are not
damaged by hot steam.
Steaming clothes
Hang the wrinkled article of clothing on
a clothes hanger.
Pull the clothing tight with one hand
and place the appliance over the
creased area beginning at the top of
garment.
Gently press the fabric brush (H) against
the clothing and move the appliance
down over the fabric at the same time
pressing the burst of steam (B) every 4
seconds.
steam setting.