Rowenta Steam 'n Press Instructions For Use Manual page 6

ATTACHING AND REMOVING THE SOLEPLATE COVER
Attaching the soleplate cover
The Steam 'n Press should be unplugged and completely cool when
removing or attaching the soleplate cover.
Your appliance can be used as a Steambrush once cover is attached.
Reference "Steambrush Function" section of instructions for further
use information.
Removing the soleplate cover
The steambrush should be unplugged and completely cool when
removing or attaching the soleplate cover.
Reference "Ironing Function" section of instructions for further use
information.
6
To attach the soleplate cover (J) to the
Steam 'n Press, hold the soleplate cover
by the ribbed finger grips (I) and slide
the cover over the soleplate.
Turn the soleplate cover lock (F) half a
turn (180°) to the left to lock the sole-
plate cover into position.
To remove the soleplate cover (J) turn
the soleplate cover lock (F) a half turn
(180°) to the right.
Grip the soleplate cover by the ribbed
finger grips (I) on both sides as shown
and pull towards the tip of unit to
remove.