VIETA VTD40 Owner's Manual page 5

Identification of Controls
Battery Pack
1
Match the battery pack into the holes on the back of the player,
Combine the battery pack to push up until you can hear the click sound.
2
When playing, you can draw out the underprop switch to lock.
Battery charge
1.Recommend charge way: please charge the battery more than 4
hours (must push ON/OFF switch to OFF).
2. When the unit is working , if you want to charge , please select
"charge on" (this method will take about 12 hours for full charge).
3. When the unit is working ,the battery will hot be charged if you do
not select "charge on" .
4.When the battery is full charged, the green lamp will light on.
Insert the battery
Refer to the drawing, take the back cover of the remote control off
and remove the empty battery receptacle.
Prior to shipping, a separating film was applied to the battery.
Remove this film.
Insert the battery into the receptacle and insert the receptacle into
the remote.
For the best results,aim the remote towards at the player,sreceiving
window. Stay within 15 feet and angles of 60 degrees or less.
Under normal use the battery will last for one year.
Remove battery during storage or when you are not using the DVD
player for a long time.
4