Troubleshooting Tips - VIETA VTD40 Owner's Manual

7' tv with tdt
Table of Contents

Advertisement

Parameters and specifications
Electronical parameters
Item
Power requirements
: AC 100-240 V , 50/60 Hz
Dimensions (Approx.)
: 202(L)X192(W)X27.8MM
Power consumption
: <10W
Weight (Approx.)
: 1 kg
Operating humidity
: 5 % to 90 %
VIDEO OUT
:1.4 Vrms (1 KHz, 0 dB)
AUDIO OUT
:Speaker:1WX2,2X
Audio
Video
:2 channel : 2Vrms (1KHz 0dB)
Audio
System
Signal system
: PAL / NTSC
Frequency
: 20Hz to 20 kHz(1dB)
response
:More than 80 dB (ANALOG OUT connectors only)
Signal-to-noise ratio
Dynamic range
:More than 85 dB
:Remote control, AC adapter,
Stereo headphone,Rechargeable battery,
Accessories
Car cigarette Adapter,antenna,car Bag
N
Note: Design and specifications are subject to change prior notice.
Standard requirement
Headphones
output

Troubleshooting tips

Troubleshooting tips( Common)
Before calling for service, you can check the following items on
symptoms and solutions
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are proper.
No picture:
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV is "video".
Ensure that the LCD is on.
No remote control:
Check the batteries are installed with the correct polarities(+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control unit and the
remote control sensor.
Operate the remote control unit at a distance of not more than 8
meters from the remote control sensor.
No key operation(by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the re-connect it.(The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
12

Advertisement

Table of Contents
loading

Table of Contents