VIETA DVD 30 User Manual page 18

Advanced Features
Modes and Features Setup
Select [Video Output], and press ENTER or to display
the [Video Out] submenu:
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
[S-Video] - Select if you connected the DVD player to your TV
using the composite Video output.
[YUV] - Select if you connected the DVD player to your TV using
the YUV output.
[RGB] - Select if you connected the DVD player to your TV using
the RGB output.
Note:
The Composite video and S-video output is always available.
Press to change your selection
Audio Setup
The Audio menu allows you to set the analog and digital
audio outputs to correspond with the external components
you have connected to the player. For example, if you con-
nected the player to a TV using the Stereo Audio jacks, you
should set 2 channel to Enjoy downmixed stereo audio.
You can set the audio format for each of the following sour-
ces: MP3, CD and others. DVD playback must be stopped
in order to adjust the Audio setup.
Set Digital Out to:
PCM (default) To output 2 channel digital from the opti-
cal/coaxial digital audio outputs; e.g., to a Minidisc recor-
der.
RAW To output the raw 5.1 channel digital bitstream form
th optical/coaxial digital audio outputs; e.g., to an external
amplifier with a Dolby Digital decoder.
Off To disable Dolby Digital decoder.
Press SETUP to save and exit.
PCM stands for Pulse Code Modulation, and is the stan-
dard 2-channel stereo format used for audio Cds.
18