Basic Playback; Basic Operation - VIETA DVD 30 User Manual

Basic Playback

Basic Operation

Preparation before playing:
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3. Turn down the volume on your amplifier, and then power
it on.
4. Set the TV to the AV input connected to the DVD player.
5. Set the amplifier to the AV input connected to the DVD
player.
STEP 1 - Press POWER to start the
player. The DVD logo appears on the
TV screen.
STEP 2 - Press OPEN/CLOSE either on
the front panel or remote control.
When the tray is opened, place the
disc on the tray with the label side
up. Press OPEN/ CLOSE again to
close the disc tray.
14
STEP 3 - Press the PLAY button on the
front panel or remote control.
The player will automatically read
and identify the disc, and begin
playback.