Bluetooth Operation - VIETA VNT7000BT Owner's Manual

MENU OPERATION
4) VIDEO SETUP
When you open the VIDEO menu, you will see the following picture:
You can adjust the value of the brightness, contrast, hue, saturation and
sharpness.
5) DIGITAL SETUP
When you open the DIGITAL menu, you will see the following picture:
* OP MODE: to set the operating modes for Dolby Digital decoder, there are
LINE OUT and RF REMOD to be selected.
* DYNAMIC RANGE: you can adjust the dynamic range between OFF, 1/8, 2/8.
3/8, 1/2, 5/8, 3/4, 7/8, FULL.
* DUAL MONO: there are STEREO, MONO L, MONO R and MIX MONO to be
selected.
※ LAST PLAY MEMORY
1) During disc playback, if you turn off the unit and then turn on the unit again, the
DVD unit will resume playing from the point that just interrupted.
2) During disc playback, if you press SRC button on the front panel or MODE
button on the remote control to switch to other mode, then return to DISC mode
again, the unit will resume playing from the point that just interrupted.
※
--- click to return to the main menu interface.

3. BLUETOOTH OPERATION

In the main menu click [BT] icon to enter into the following interface:
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
26