Basic Operation - VIETA VNT7000BT Owner's Manual

BASIC OPERATION

TURNING ON/OFF THE UNIT
Press button on the front panel or on the remote control to turn the unit on. When
the unit is on, press
the remote control will turn the unit off.
PANEL ANGLE ADJUST
The front monitor panel can be turn down or turn up to some degree by using
buttons on the front panel.
SOUND ADJUSTMENT
Repeatedly press SEL button on the front panel of the unit or on the remote control to
select the desired adjustment mode. The adjustment mode will change in the
following order:
VOL BAS
(volume
After selecting your desired mode, you can adjust the current mode being displayed
by using VOL+/- buttons on the front panel or VOL+/VOL- buttons on the remote
control. Note: When P-EQ mode is activated (not in EQ OFF mode), press SEL
button to select the modes. And Bass /Treble modes are invalid. (Shown as below)
VOL
REMOTE SENSOR
There is a remote sensor on the front panel. You can point the remote control to the
remote sensor and press functions keys on the remote control to control the unit.
Note to operate it within the certain operation angle.
VOLUME LEVEL ADJUSTMENT
+ -
Press the VOL /
remote control to adjust the volume level. You can also adjust the volume level by
tapping the volume bar displayed on the screen.
MUTE FUNCTION
Press MUTE button on the front panel shortly or
the sound. Press it again will resume the sound.
Hold press MUTE button on the front panel to switch off the TFT display, then touch
the screen or press buttons to switch on the display.
MODE SELECTION
When the unit is on, press
remote control to select the desired mode to enjoy. Such as RADIO, DISC, SD/USB,
AV IN, BT, IPOD mode.
button on the front panel for several seconds or press
TRE BAL
bass treble balance
BAL FAD
buttons on the front panel of the unit or VOL+/VOL- buttons on the
SRC button on the front panel or MODE button on the
FAD BRI
fade brightness contrast color)
BRI CON
on the remote control will mute
14
CON COL
COL
on
/