Advertisement
●
Pause Function:
(Note: In IPOD Play or Pause status, LCD won't display
LCD of IPOD).
●Up and Down Music Selection Function: In IPOD play or pause status, press
call out Previous Music/ Next Music.
●Forward & Reward Function: In IPOD Play or Pause status, press
longer time to call out Forward & Reward Function.
3. AUX: In IPHONE status, press FUNCTION key to switch over to AUX status, just insert the
external sound source like MP3/CD, etc. into AUX port on the back of unit and start to enjoy the
music inputted by AUX (please adjust the volume of external sound source to the medium level
and turn it into PLAY status).
●Volume Adjustment: Volume may be tuned up or down between 00 and 30.
●Battery Function: Open the battery door on the back of unit without connecting AC power
supply and load four No.5 batteries into the battery cartridge according to the positive and
negative polarities. Then time will be displayed on the screen, press
power-on status to enjoy the music. In case of power supply with DC 7V transformer,
disconnect the battery and use the external DC supply.
● Clock/Alarm Clock Settings: Press AL/SET key for a longer time to enter into Clock
Settings status, then the clock will be displayed and HOUR figures on LED start to flash, you
can press Previous Music/ Next Music key to adjust the hour; press AL/SET key once again,
HOUR figures on LED will be displayed stably and MINUTE figures start to flash, you can
press
and
clock time and press this key again to confirm the settings and exit from the clock status.
●Alarm Clock Settings: Press
AL/SET key, and the alarm clock modes will flash on LED including ring tone/ radio/ IPOD/
OFF modes, select one of these modes and press it for 2 seconds and enter into Alarm Clock
Setting. Press Previous Music/ Next Music key to adjust the time, press AL/SET key to access
Alarm Clock Settings, press
press AL/SET key to complete the settings.
● Troubleshooting Guidance and FAQs:
Before repairing this unit, please find out the possible causes as per the following FAQs to
make simple troubleshooting if necessary, they may help you to solve the problems and resume
the normal operations. If not, please get your product to the professional service men for
maintenance.
1. Q: No power
A: Please make sure the source jacket is connected well.
In IPOD Play or Pause status, press
keys to adjust the minute and finally press AL/SET key once to set the
key to power off and enter into STAND BY status, press
POWER
and
/MEM key once to pause playing.
and
keys to adjust the alarm clock time and finally
ǁ and they only display on
/
/
key for a
key to access
POWER
to
Advertisement
