Use The Usb; Listening To Radio Broadcasts - VIETA VMD95LS Instruction Manual

Use the USB

Use the USB
Use the USB Use the USB Use the USB
You can connect the USB flash to the USB jack at the front panel of unit. The unit will play MP3
music or the pictures from the flash directly.
1. Plug the USB flash into the USB jack.
2. Press the
FUNCTION FUNCTION
FUNCTION FUNCTION FUNCTION
function.
3. Display shows the word "USB" .
4. MP3 music or the pictures will be played automatically.
USB Storage Device Data Protection USB Storage Device Data Protection
USB Storage Device Data Protection USB Storage Device Data Protection USB Storage Device Data Protection
- - - - - Always insert the USB device in the correct direction. Failure to do so may result in damage
to the USB device and this product.
- Do not remove the USB device while it is being accessed.
- Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against
corruption, data loss or device malfunction. Please note that our company shall not accept any
liability for damage or loss of stored data.
Note: Note: Note: USB connection is not compatible with all hard drive models.
Note: Note:

Listening to Radio Broadcasts

Listening to Radio Broadcasts Listening to Radio Broadcasts
Listening to Radio Broadcasts Listening to Radio Broadcasts
Caution: Caution: Before listening to the radio, please check if FM antenna is correctly connected. Caution:
Caution: Caution:
Press the function select button
select FM function.
Press the button
station is found.
Press and hold the button
up automatically until a right station is found.
(You also can operate the tuning forward key
Press the button
frequency until the next station is found.
Press and hold the button
down automatically until a right station is found.
(You also can operate the tuning backward key
You can store the well tuned station by pressing the program button
the remote
button on unit or the
repeatedly to move from frequency to frequency until the next
(C)
(C)
repeatedly to move from frequency to
(D)
(D)
. (You can preset up to 16 FM stations .)
button on remote control to select the USB
USB USB
USB USB USB
on the unit or on the remote control to
(FUNCTION FUNCTION) FUNCTION FUNCTION FUNCTION
for one second or more, the frequency will change
(TU+ TU+) TU+ TU+ TU+
for one second or more, the frequency will change
(TU- TU-) TU- TU- TU-
17
on the panel of the unit.)
on the panel of the unit.)
( PROGRAM PROGRAM ) on PROGRAM PROGRAM
PROGRAM