Tool Kit; Removing And Installing The Shroud And Covers - Yamaha FXNytro FX10RTRSZ Owner's Manual

Periodic maintenance and adjustment
ESU13001

Tool kit

The service information included in this man-
ual and the tools provided in the owner's tool
kit are intended to assist you in the perfor-
mance of preventive maintenance and minor
repairs. However, additional tools such as a
torque wrench may be necessary to perform
certain maintenance work correctly.
1. Tool kit
ECS00780
NOTICE
Before starting the engine, make sure that
the tool kit is securely fastened and that
the storage pouch zipper is completely
closed.
TIP
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU12782
Removing and installing the
shroud and covers
EWS00091
WARNING
Be sure shroud and covers are secured
before operation. A loose shroud or cover
could move and cause loss of control.
44
Shroud
To remove the shroud
Loosen the fasteners, and then slide the
shroud forward.
1. Fastener
1. Shroud
To install the shroud
Hook the end of the shroud onto the front cov-
er, insert the projections on the shroud into
the slots in the headlight unit stay, and then
tighten the fasteners.
1