ACME HD-110 User Manual page 10

GB
are styling your hair.
1. Pre-dry your hair with the hairdryer on the highest heat setting. For drying, separate your hair
into 5-cm wide sections. Place a large round brush at the root of one of the sections.
2. Point the hair dryer with the concentrator at a 90-degree angle to the section and run the
brush under it, beginning at the roots and working down to the tips. Your hair dryer should
now be set at medium. Repeat the process several times to dry the section completely before
moving on to the next section.
3. Finish by turning the ends under.
cleaning
1. Unplug the appliance before clean it.
2. Remove the attachments from the appliance before you clean them.
3. Clean the appliance with dry cloth.
4. Clean the attachments with wet cloth or wash it with water.
5. Wait until dry before you use or store them.
storage
1. Always unplug dryer after use.
2. Do not wind the mains cord round the appliance.
3. Allow the hair dryer to cool for 10 to 15 minutes before storing it.
10