Hasbro B Daman Wing Ninja 98069 Instruction Manual

READY, SET, B-DAFIRE!™*
Assembly required. No tools needed.
WARNING: Do not use B-DAMAN™ launchers or B-DAMAN
game boards on tables or other elevated surfaces.
B-DAMAN launchers/game boards are intended to be used on the floor. Do not lean over the game
™
board when B-DAMAN launchers are in play. B-DABALLS™* may bounce up and hit eye or face.

PARTS:

• Before assembly and playing, please
read instructions. Please keep these
instructions for future reference.
IBA BLASTER™* Front,
• When removing parts from runner IBA BLASTER Back,
frame, ask an adult to help you trim off
Runner Frame Parts,
any excess plastic using scissors or
1 Spring,
other suitable tool.
1 B-DABALL™*,
• The frame is numbered. Please follow
Target Pin, Decals.
the numbers carefully and make sure
you are assembling the right parts.
• Do not remove parts from runner
frame until directed to by the
instructions.
• Discard plastic bags immediately.
1
B - D A M A N D ATA :
4
WING NINJA *
TM
B U I L D I B A B L A S T E R :
2
5
IBA BLASTER
ready for battle!
AGES 8+
W I N G N I N J A A R M O R A S S E M B LY:
98069/98047 Asst.
6
Remove arms from body. Slots on Q-4 should face down, with waffle-print
area towards the rear. Press wedges on Q-1 and Q-2 into slots on IBA Body.
Flat side of the wedges should be facing the front of IBA Body.)
#32
8
Insert Q-3 and press
in until it clicks.
3
Install spring.
11
Label
7
Be sure wings are firmly
pushed into Q-4.
Back View
9
Label
Label
Label
12
Push tabs on helmet into slots on head.
10
Helmet
13
Your
WING NINJA
is ready!