Table of Contents
Advertisement
CLEAN LINE
Clean Line is a feature which can help determine the
hardness of the bottom. Clean Line "cleans out" the target
signal on harder objects. A hard bottom will appear cleaned
out in the center. A soft bottom will be all black.
Press the MENU button twice, then, the 3 button to enter
the Clean Line submenu. There are two levels, High and
Low. Use High over softer bottom and Low over harder
bottom. Press the 2 button to activate the Clean Line fea-
ture on High. Press the 3 button for Low.
CLEAN ECHO
Clean Echo reduces interference from other depthfind-
ers running on the same frequency. Press the MENU but-
ton twice, then, the 4 button to enter the Clean Echo sub-
menu. To turn it on press the 2 button. To turn it off press
the 1 button.
A-MODE
A-Mode gives an instantaneous, vertical, representa-
tion of the depth below. It gives you the ability to recog-
nize bottom changes and targets before they scroll onto the
normal display.
To enter the A-Mode submenu, press the MENU but-
ton twice, then, the 5 button. To activate the feature press
the 2 button. To turn it off press the 1 button.
20
Advertisement
Table of Contents
