Connection Instruction; Hardware Connection - Computer - TP-Link TL-PA251 User Manual

Integrated
Electrical Socket
Note:
1. If the pair button is pressed till all the LEDs turn off (about 10 seconds), the adapter will leave the
network which it is associated with and its network name assumes a random value. The Power LED
turns off when it disconnects from the Powerline network.
2. For detailed information about the Pair button, please refer to
Use the Pair Buttons

2.4 Connection Instruction

To ensure the optimum performance of the Powerline Adapter and significantly improve the transmission
capacity of the network, we recommend that you comply with the following connection rule:
Plug the Powerline Adapter directly into a wall socket but not the multiple sockets.
To take full advantage of the filter function of the Powerline Adapter and to improve data
transmission in the network, always plug the multiple sockets into the integrated electrical socket of
the Powerline Adapter.
2.5 Hardware Connection – Computer
For those computers you wish to be networked by Powerline Adapter, each of the computers must be
properly connected with a Powerline Adapter through an Ethernet (RJ45) cable.
Following are the steps to properly connect the Powerline Adapter to your computer:
TL-PA251 AV200 Powerline Adapter with AC Pass Through
The integrated electrical socket allows additional devices or multiple
sockets to be connected to the adapter just like to a normal wall socket.
No electrical socket is lost.
Chapter 5 Advanced Feature: How to
6