Direct Selection Of Tracks; Repeat Play; Convenient Functions - Toshiba SD-260E E User Manual

A track is skipped forward or backward each time the
button is pressed.
Pause
Press PLAY/PAUSE during playback.
The play freezes.
To return to normal play:
Press PLAY/PAUSE again.

DIRECT SELECTION OF TRACKS

Selecting by Time
You can play the audio CD starting from any time point you
want.
Press SEARCH on the remote control during playback.
The time search box is displayed on the screen as GO TO:
_ _ : _ _ / xx : xx
Enter the time using number buttons.
¥
NOTE:
• Press RETURN to cancel the operation.
• If you wait for ten seconds without pressing any button
for selecting tracks, the operation is cancelled.
Accessing tracks using number buttons
You can play any track you want, just by pressing the
corresponding number button.
For the track numbers which are greater than "9", use +10
button. Press this button once and then enter the two digit
track number.
If you attempt to enter a number greater than the total
number of tracks on disc,
screen.

REPEAT PLAY

Press PLAY MODE during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
If "REP-ONE" is displayed, the current track will be played
again.
If "REP-ALL" is displayed, all tracks on disc will be played
again.
If "REPEAT OFF" is displayed, the repeat mode is disabled.
"
symbol is displayed on
Repeating a section between two specific points
(A – B repeat)
Press A-B RPT during playback at the point where repeat
play is to commence (A).
"A TO B SET A" is displayed.
Press A-B RPT again at the point where repeat play is to
be concluded (B).
"A TO B SET B" is displayed and the repeat play of the
selection between points A and B starts.
To return to normal play:
Press A-B RPT again. "A TO B CANCELLED" is displayed
and the A-B Repeat is disabled.
¥
NOTE:
If you give up entering the point B after entering point A,
simply press RETURN and the operation is cancelled.

CONVENIENT FUNCTIONS

Displaying the time information
Press TIME during playback.
Each time this button is pressed, an information box is
displayed on TV screen to indicate the status of the time
displayed on the VFD display.
If "SINGLE ELAPSED" is displayed, the VFD display on the
unit shows the elapsed time for the track that is being
played.
If "SINGLE REMAIN" is displayed, the VFD display on the
unit shows the remaining time for the track which is being
played.
If "TOTAL ELAPSED" is displayed, the VFD display on the
unit shows the elapsed time for the disc which is being
played.
If "TOTAL REMAIN" is displayed, the VFD display on the
unit shows the remaining time for the disc which is being
played.
Program Function
Press PROGRAM button to select program mode in stop
mode.
Enter track numbers that you want to add to program list.
For the track numbers which are greater than "9", use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
Press ENTER button to finish the program entry.
Screen is cleared and it will start playing the program list.
- 26 -
ENG