Zanussi ZOB 985 QP Instruction Manual page 15

How to use the pyrolytic cleaning
function
Before activating the pyrolytic cleaning function,
remove any excessive spillage and make sure that
the oven is empty. Do not leave anything inside it
(e.g. pans, grids, baking tray, dripping pan, etc.) as
this could heavily damage them.
Ensure that the oven door is closed before activating
the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it is
advisable not to use the hob as this could cause
overheating and damage the appliance.
During the pyrolytic cleaning cycle the oven door
becomes hot. Children should be kept away until
it has cooled.
Choose this function to clean the oven by pyrolysis.
The following pyro levels are available:
Pyrolytic 1 (P I) time : 2 h = 30 min heat-up +1 h at 480°C
+ 30 min cooling down.
Pyrolytic 2 (P 2) time : 2 h 30 min. = 30 min heat-up +1 h
30 min at 480°C + 30 min cooling down.
The pyro duration time cannot be changed.
To activate the pyrolytic cleaning function proceed as follows:
1. Press button to switch on the oven. Press the
button as often as necessary, until the "Pyro" function
symbol (level 1 - P I) will appear on the display
(Fig. 18).
2. The Cooking Duration symbol
seconds; during this time push ' ' or '
select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function
(Fig. 19).
3. Once you have chosen the desired pyrolytic function,
the "Pyro" writing will flash on the display waiting for
confirmation to start the pyro cleaning function.
4. To confirm which pyrolytic function you desire, press
button , the "Pyro" text will stop flashing, the oven
lamp will switch off and the pyrolytic cleaning cycle starts
(Fig. 20).
As soon as the oven heats up, the thermometer symbol
rises slowly , indicating that the temperature inside the
oven is increasing.
5. After some time, the door lock will be activated and the
related symbol
time the button is no more active.
At the end of the pyrolitic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will be
emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, press
button .
NOTE: The time indication is comprehensive of the cooling
down time.
If you select a cooking function while the pyrolytic
function is active, the cleaning cycle will be inter-
rupted.
If the oven door lock is activated, it is impossible to
select any cooking function until the door lock is off.
78
will flash for 5
' buttons to
will be displayed (Fig. 21). At this
Fig. 18
Fig. 19
Fig. 20
Fig. 21