Display - Zanussi ZWD 14581 W1 User Manual

Display

Display ( 7 )
The display shows the following information:
Duration of the selected programme/
7.1
After selecting a programme, the duration is
displayed in hours and minutes (for example
2.05). The duration is calculated automatically
on the basis of the maximum recommended
load for each type of fabric.
After the programme has started, the time
remaining is updated every minute.
Calculating phase icon
7.2
When selecting the «proportional» program-
mes, the display shows the washing duration of
the maximum recommended load.
After the button has been pressed, on the
8
display appears an arrows animation indicating
that the appliance is calculating the laundry
amount and the real duration. During this time,
the washing duration shown decreases.
When the calculating phase has finished, the
icon disappears from the display and the
7.2
washing time is adjusted to the real load.
/Alarm codes
In the event of operating problems, some alarm
codes can be displayed, for example
paragraph «What to do if...»).
/Incorrect option selection
If an option which is not compatible with the set
wash programme is selected, the message Err
is displayed for a few seconds and the red light
of button
/Delayed start
The selected delay (20 hours max) set by
pressing the relevant button appears on the
display for a few seconds, then the duration of
the previously selected programme is
displayed. The delay time value decreases by
one unit every hour and then, when 1 hour
remains, the time decreases every minute.
Child Safety lock
7.3
Washing programme phase icons
7.4
By selecting the wash programme, the washing
programme phase icons corresponding to the
various phases making up the programme are
shown in the bottom of the display.
After the machine has started, only the running
icon stays on. When the programme has finished,
three flashing zeros «
Drying phase
7.5
During the drying phase the display shows the
drying icon illuminated and the selected drying
(see
E20
time to indicate that the appliance has started
the drying phase.
8
starts flashing.
» are displayed.
0.00
9