Table of Contents
Advertisement
Symptom
The operation is slow in
response.
The screen was tapped, but
there is no response. The
operation button does not
work either.
The screen is dark.
The screen is hard to see.
Can not connect to your
computer.
ActiveSync does not
function when your
Pocket PC is connected to
your computer with a USB
cradle or USB cable.
Can not access the Internet. The connecting using a
Instruction Manual
Cause
Insufficient memory
Some malfunction
Some malfunction
The front light is off.
Brightness setting is
incorrect.
—
"USB SETUP TOOL" was
not executed. It should be
performed after execution
of ActiveSync.
The USB driver of your
computer may not be
compatible.
specified cellular phone
connection cable was not
correct.
Radio waves of a connected
cellular phone are getting
worse.
Setting is incorrect.
Additional Information
Correction
Secure the free memory.
Quit the application if it is
not in use.
Reset the system. If no
action is observed after
resetting the system,
initialize the system.
(However, the data will be
deleted.)
Reset the system. If no
action is observed after
resetting the system,
initialize the system.
(However, the data will be
deleted.)
Press and hold the power
button until the front light is
turned on.
Select
, Settings,
System, Front Light to
adjust the screen brightness
for better sight.
See Help of ActiveSync.
Install "USB SETUP TOOL"
contained in the Companion
CD.
Reselect the USB driver.
Check whether the
connecting using a specified
cellular phone connection
cable is correct.
Carry out communications
where radio wave conditions
are satisfactory.
Carry out correct setting.
9-2
Advertisement
Table of Contents
