To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the
computer.
Do not try to remove a memory module with the computer turned on. You
can damage the computer and the module.
2. Turn the computer upside down and remove the battery and loosen the
screw securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will force
one end of the module up.
5. Grasp the module and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
6. Seat the cover and secure its screw.
7. Replace the battery.
Additional battery pack
You can increase the portability of the computer with additional battery
packs. If you're away from an AC power source and your battery runs low,
you can replace it with a freshly charged battery. See Chapter 7, Power and
Power-Up Modes.
Additional AC adapter
If you frequently carry the computer to different sites such as your home
and office, having an AC adapter at each location reduces the weight and
bulk of your load.
Satellite A200/Satellite Pro A200
1
3
2
1
Removing the memory module
Optional Devices
Latch
9-9