Changing The Loudspeaker Volume Of The Base Station - TCM Operating Instructions Manual

Displaying and dialling an emergency number
You can dial an emergency number from a handset that is barred for external dialling
(page 102) directly or as follows.
[RRRRRRRRRRRRRRRRRRRRRR]
EmerCall
OK
If a prefix (APL) is set (page 108), it is automatically put in front of the
◆
i emergency numbers.
Emergency numbers cannot be dialled if the keypad protection has
◆
been activated (page 11).

Changing the loudspeaker volume of the base station

The speaker volume is the volume of the loudspeaker of the base station when replaying
messages and listening in. You can choose between volume levels 1 and 5. You can set
the volume at the base station or via the handset.
Setting at the base station:
While the message is being played back press the base station key ñ (louder) or ð
(quieter).
Setting via the handset:
í
[______________________________________________]
[______________________________________________]
Audio Settings
[______________________________________________]
Loudspeaker Vol
[RRRRRRRRRRRRRRRRRRRRR ]
Save
The handset is barred for external dialling:
Press the talk key.
Press the display key. The available emergency num-
bers are displayed. If only one emergency number
has been saved, this will be dialled immediately.
Select the emergency number and confirm. The con-
nection is set up.
Open the menu.
Select the menu item and confirm.
OK
Confirm.
OK
Confirm. You will hear the current volume.
OK
Set the required volume (1–6) in the entry field.
Press the display key to save the setting.
Hold down (return to idle).
Setting the base station
103