Installation - LG WINE CELLAR User Manual

1. Choose a Good Location
Maintain proper distances between
the refrigerator and items around it.
• To ensure proper air circulation around the
fridge-freezer,please maintain sufficient space
on both the sides as well as top and maintain
at least 2 inches (5 cm) from the rear wall.
• If the refrigerator is too close to surrounding
items, its operation may be affected and more
energy will be consumed.
Install in a dry and well-ventilated
place
• Do no install the refrigerator in a damp place or in
places where it can easily get wet, to prevent
metal parts from rusting or causing electric shock.
• Install the refrigerator in a well-ventilated place.
Avoid heat, and direct sunlight
• If surrounding temperature is high, it may
decrease product efficiency and increase electric
usage.
2. Levelling the refrigerator
Place in a firm and level location
• If the floor is not already level, use the adjustable feet to level the refrigerator from side to side.
• On carpeted floors and some types of hardwood floors, it is advisable to place the refrigerator on a
thin sheet of plywood to prevent discoloration caused by heat from the refrigerator's condenser.
• An unstable floor can cause refrigerator vibration, noise, and door sag.
Adjust the front of the refrigerator
slightly higher than the back
• Rock the refrigerator side to side, front to back,
and corner to corner to be sure that it is solid;
then readjust the front leveling feet so the front is
slightly higher than the back.
• If the front is low, the door may not close tightly.
Refrigerator performance will be affected and
condensation may form on the interior.
The Wine Cellar refrigerator is designed for best performance in an environment between 10°C and
35°C. A higher or lower temperature will affect the refrigerator's operation and shorten its useful life.

Installation

8
Keep proper space
More than
5 cm to back
humidity
mat
Raise the front
end slightly high
adjustable
leveling foot