Call Handling - SENDO 330 User Manual

12
Screensaver
A screensaver is a picture that is displayed
when the phone has been idle for a certain
amount of time. It is possible to turn this on
or off, select the delay before it becomes
active and change the picture.
ζ
Note: When the screensaver is
displayed, press
display and use the phone.

Call handling

Select this to set defaults for the way in
which you deal with incoming calls. The
options are as follows:
Auto redial
When auto redial is activated, the phone
will automatically redial a number when
the call attempt fails. If the other user's
phone is busy, the phone will wait a few
seconds before each attempt, and then
beep when it succeeds.
Auto answer
This function is only applicable when
certain hands-free accessories (for
example, a personal hands-free headset)
are connected to the phone. When you
receive an incoming call with this feature
activated, the phone rings three times
before automatically accepting the call.
χ
to return to normal
Any key answer
When this function is activated, you can
answer an incoming call by pressing any
δ
key, except
Security
Your PIN (Personal Identity Number) code is
a code that you can use to protect your
phone from unwanted users. This is the
number that the phone may ask for at switch
on. The options are as follows (depending
on what PIN activation settings you have
selected):
Activate PIN
Enter your PIN at switch on (if your SIM
card supports this).
Deactivate PIN
You do not have to enter your PIN at
switch on.
Change PIN
Select this to change your PIN code.
Change PIN2
Some network services require a separate
security code - the PIN2 code. Select this
option to change your PIN2 code.
To activate, deactivate or change the PIN
code, you need to enter the current PIN
code. To change the PIN2 code, you need
to enter the current PIN2 code. If you don't
know your PIN code or PIN2 code, contact
your service provider.
38
, Reject.