Thrustmaster 5.1 SOUND SYSTEM User Manual page 9

The SURROUND MODE button enables you to switch from one audio mode to another. In this
way, you can enjoy spatial sound even with a stereo source, thanks to Dolby® Pro Logic mode.
Example: you are listening to an audio CD; the STEREO LED is lit up. Press the SURROUND
MODE button to switch to Dolby Pro Logic mode: the signal emitted by the front speakers is also
reproduced on the rear and center speakers.
ADJUSTING THE VOLUME
There are two ways of adjusting the volume: via the subwoofer and via the decoder. The "master"
setting is on the decoder. I.e. if the volume was on a scale from 0 to 100 and you set the decoder
volume to 20, the maximum volume on the subwoofer would not exceed 20.
If you adjust the volume on the subwoofer, this volume setting will also be applied to the 5
speakers. Adjusting the volume via the decoder allows you to set independent levels on the
following 4 elements:
•
The front speakers (press the MASTER button on the remote control),
•
The center speaker (press the CENTER button on the remote control),
•
The rear speakers (press the SURROUND button on the remote control),
•
The subwoofer (press the SUB button on the remote control).
Once the element has been selected, the indicator lights up on the front of the decoder to display
the setting in question: the 6 LEDs represent a scale of values with the SL LED corresponding to
the minimum setting and the SR LED corresponding to the maximum setting.
Use the VOL + and VOL – buttons on the remote control to adjust the volume.
Note: the BASS button on the subwoofer allows you to adjust the bass level.
Mute function
The decoder includes a mute function: press the MUTE button on the remote control to turn off
the sound; the MUTE LED lights up. Press this button again to restore the normal volume.
9/10